Withstand voltage gauge for insulation test HIT-250
An insulation test can be performed with a maximum of 250 V when using internal power supply and a maximum of 1 kV when using external power supply. Although it is a 2-terminal connection, contact check is possible. Insulation measurement between crystal terminals and insulation measurement between package and terminals are possible without an external switching relay.
basic specifications
| Number of channels |
1 |
|---|---|
| Output voltage |
DC 1 to 250 V ± 1% ± 0.3 V |
| Time to calculate |
50 ms to 9999 ms |
| Charging current |
5 mA ± 2 mA |
| Measurement accuracy |
Depending on the current flowing through the object to be measured, the range is as follows |
| Contact detection range |
0.1 pF or more |
| Contact detection frequency |
1.9 MHz to 2.1 MHz |
| Input terminal |
BNC or SHV |
| Measurement mode |
Mode AB: Input terminal A to B |
| Interface |
USB + DI / O |
| Input power supply |
AC 100 to 200 V 50/60 Hz (AC adapter DC 5 V 2 A included) |
| Dimension |
160 (W) x 99 (D) x 230 (H) mm |