High-speed processing of a variety of crystal blanks, from ultra-small to large sizes, etched and polished
Quartz blanks are fed from a hopper, and the position of the quartz blank is detected by an imaging device on the feeding rotor and transported to the measurement unit. The measurement unit automatically adjusts the air gap between the upper and lower electrodes, and the network analyzer realizes high-precision measurement and classification.
Model |
1350 (1210 to 2520 compatible) |
1300 (1612 to 3225 compatible) |
1330 (For large products) |
---|---|---|---|
Measurement item |
· Blank basic frequency |
||
Measurement frequency |
10 to 180 MHz |
||
Measuring instrument |
Network analyzer board HC2000C(HUMO) |
||
Measurement accuracy |
± 100 ppm |
||
Corresponding variety |
L=0.7㎜ to 1.4㎜×0.4㎜ to 0.8㎜ |
① 2.0 mm × 1.3 mm to 1.4 mm × 1.0 mm |
① Round Work:φ5mm to 11mm |
processing power |
166 pcs/min 【0.36 sec / piece】 |
100 pcs / min 【0.6 sec / piece】 |
60 pcs / min 【1.0 sec / piece】 |
Dimension |
550(W) × 550(D) × 1600(H)mm |
650(W) × 500(D) × 1600(H)mm |
650(W) × 500(D) × 1600(H) mm |
Classification |
Binning: 45 ranks (including RI) |
Binning: 45 ranks (including RI) |
Binning: 24 ranks (including RI) |
Power Supply |
AC200V 50/60Hz 3A |
||
Air Supply |
0.4MPa(dry clean air) |
* Because of interim specifications, there is a possibility of specification change without notice.
Flow of introduction