Equipment for small and thin ceramic capacitors for wire bonding
This system is a characteristic sorter that supplies, measures, and classifies small and thin wire bonding capacitors.
The workpiece is fed from the hopper, detected by the image device on the feeding rotor, and transported to the measurement unit. At the measuring unit, each characteristic is inspected, and the workpiece is classified and stored according to whether the characteristic is good or bad.
Basic Specifications
supply section |
Hopper section + supply rotor |
---|---|
Measured items and measuring instruments ※ |
Capacity and loss factor:E4981A(Keysight) |
Number of classifications |
7 categories (including RI) |
Chip size(mm) |
□0.35mm~1.0mm×t 0.1mm~0.35mm |
throughput |
Transport 1.0 + measurement time sec/piece |
Number of columns |
1 row |
Power supply |
AC-200V 5A 50/60Hz |
Air |
External air supply 0.4MPa (Dry clean air) |
Dimensions |
750mm (W) × 650mm (D) × 2050mm (H) |
Weight |
Approx. 250kg |
※The number of measuring instruments varies depending on the specifications.
Flow of introduction